::: "DAIHAN" Digital Homogenizer with Remote Controller, WiseMixTM HG 15D-series디지털 균질기, 분리형 컨트롤러, Display of Speed & Power, 1~2500 ml, 2000~27000 rpm, “ISO” :::

       
       
       
       
 
 
새 페이지 2
"DAIHAN" Digital Homogenizer with Remote Controller, WiseMixTM HG 15D-series디지털 균질기, 분리형 컨트롤러, Display of Speed & Power, 1~2500 ml, 2000~27000 rpm, “ISO”

특징 (Feature)

■ High-speed / High Quality / Low Noise : Max. 27,000 RPM
■ Remote Digital controller : Fully Digital control using Microprocessor
■ Speed & Power Control optimized fot the Sample
■ LCD Display of Speed(RPM) and Power Bar Graph
■ High Efficiency Dispersing Tool made of Stainless Steel and PTFE
■ Over-Load Protection Functions
■ Low Cost & High Efficiency

특징 (Features )
* 고성능 디지털 제어 균질기(분리형 Digital Controller with LCD)
* Microprocessor를 이용한 Digital Controller를 채용하여 처리하고자 하는 Sample에 최적화된 속도 및 Power로 균질 실현
* 세척?살균에 편리한 Stainless steel 및 PTFE 재질의 Dispersing Tool 사용
* 광범위한 용량 및 다양한 샘플에 대해 작업이 가능
* 자체 개발하여 균질(Homogenizing)용으로 최적화된 고속/저소음 모터 탑재
* 과부하 방지 기능
* LCD에 설정 RPM(Set Speed), 측정 RPM (Measured Speed) 및 동작중인 Motor의 Power를 Graph로 표시.

※ IKA Ultra-Turrax T25용의 Tool들과 완벽 호환 가능

규격 (Specification)
　

Motor Rating(Input/Output) 300/600w
Working Range(ml) 1~2500
Speed (rpm) 2,000~ 27,000
Speed Control Resolution 10 rpm
Speed Control Digital Remonte Controller
Usable Tool HT 1018, HT 1025
Dimension (WxDxH) 60 x 70 x 230
Weight(kg) 2.5
Power AC 220V or 230V / 50or 60Hz

주문 (Ordering)
Homogenizer HG 15D-Unit, with Remote Controller, Digital 호모게나이저-Unit
DH.CV002018

Homogenizer Package, HG 15D-Set, with Remote Controller, Dispersing Tool(HT1018 or HT1025), Clamp(CL100) and Stand(ST110), Digital 호모게나이저-Set
DH.CV002019

Dispersing Tools
DH.CV002118
DH.CV002125
※ IKA Ultra-Turrax T25용의 Tool들과 완벽 호환 가능

Accessories
* DAIHAN WiseStirTM 및 WiseMixTM의 표준 Accessories 와 최적
DH.CV502010
DH.CV501510
DH.CV501515
Slip 방지용 Pad 포함
※ Dispersing Tools와 기타 Accessories의 상세 규격 및 그림은 Page 566 을 참조해 주세요!

CAT No. Description 단위/갯수 Price[VAT별도]
DH.CV501515 STAND,wide plate ST120, EA/1

가격문의
DH.CV002019 HOMOGENIZER,HG-15D,package ST110 구 DH.CV902018 EA/1

가격문의
DH.CV002118 HOMOGENIZER TOOL,HT1018, EA/1

가격문의
DH.CV002125 HOMOGENIZER TOOL,HT1025, EA/1

가격문의
DH.CV501510 STAND,standard plate ST110, EA/1

가격문의
DH.CV002018 HOMOGENIZER,HG-15D, EA/1

가격문의
 
새 페이지 2
    
S 10 N - 5 G
Working range 0,5 - 10 ml
Stator diameter 5 mm
Rotor diameter 3,8 mm
Gap between rotor and stator 0,1 mm
Circumferential speed (30.000 rpm) 6 m/s
Min. / max. immersion depth 20 / 75 mm
Shaft length 92 mm
Materials in contact with medium PTFE, AISI 316L
pH range 2 - 13
Suitable for solvents - yes
Suitable for abrasive substances - yes
Max. temperature 180 °C
Sterilization methods - all methods
Min. vacuum -
Max. pressure -
Ultimate fineness, suspensions 5 - 25 µm
Ultimate fineness, emulsions 1 - 10 µm
Ident. No.
 		   3304000
Price   USD 236.00
　
    
S 10 N - 8 G
Working range 1 - 50 ml
Stator diameter 8 mm
Rotor diameter 6,1 mm
Gap between rotor and stator 0,25 mm
Circumferential speed (30.000 rpm) 9,6 m/s
Min. / max. immersion depth 20 / 95 mm
Shaft length 115 mm
Materials in contact with medium - PTFE, AISI 316L
pH range 2 - 13
Suitable for solvents - yes
Suitable for abrasive substances - yes
Max. temperature 180 °C
Sterilization methods - all methods
Min. vacuum -
Max. pressure -
Ultimate fineness, suspensions 5 - 25 µm
Ultimate fineness, emulsions 1 - 10 µm
Ident. No.
 		   3305500
Price   USD 353.00
　
    
S 10 N - 10 G
Working range 1 - 100 ml
Stator diameter 10 mm
Rotor diameter 7,6 mm
Gap between rotor and stator 0,2 mm
Circumferential speed (30.000 rpm) 11,9 m/s
Min. / max. immersion depth 20 / 100 mm
Shaft length 115 mm
Materials in contact with medium - PTFE, AISI 316L
pH range 2 - 13
Suitable for solvents - yes
Suitable for abrasive substances - yes
Max. temperature 180 °C
Sterilization methods - all methods
Min. vacuum -
Max. pressure -
Ultimate fineness, suspensions 5 - 25 µm
Ultimate fineness, emulsions 1 - 10 µm
Ident. No.
 		   3370100
Price   USD 294.00
　
    
R 200 Clamp
For fastening the T 10 basic to the stand ST 104 (included with delivery of T 10 basic).
Ident. No.
 		   3372000
Price   USD 20.00
　
    
R 104 Stand
Small stand for T 10 basic
Diameter of support rod 10 mm
Dimensions (W x D) 242 x 355 mm
Height 370 mm
Max. load 0,7 kg
Ident. No.
 		   3386000
Price   USD 47.00
　
    
S10 D - 7G - KS - 65
Working range 1 - 20 ml
Stator diameter 7 mm
Rotor diameter 4,8 mm
Circumferential speed (30.000 rpm) 7,5 m/s
Min. / max. immersion depth 20 / 45 mm
Shaft length 65 mm
Materials in contact with medium Polycarbonate (PC), Polysulfon (PSU)
Max. temperature 100 °C
Sterilization methods yes, autoclavable
Ident. No.
 		   3433212
Price   USD 29.00
　
    
S10 D - 7G - KS - 65
Working range 1 - 20 ml
Stator diameter 7 mm
Rotor diameter 4,8 mm
Circumferential speed (30.000 rpm) 7,5 m/s
Min. / max. immersion depth 20 / 45 mm
Shaft length 65 mm
Materials in contact with medium Polycarbonate (PC), Polysulfon (PSU)
Max. temperature 100 °C
Sterilization methods yes, autoclavable
Ident. No.
 		   3433225
Price   USD 53.00
　
    
S10 D - 7G - KS - 110
Working range 1 - 40 ml
Stator diameter 7 mm
Rotor diameter 4,8 mm
Circumferential speed (30.000 rpm) 7,5 m/s
Min. / max. immersion depth 20 / 90 mm
Shaft length 110 mm
Materials in contact with medium Polycarbonate (PC), Polysulfon (PSU)
Max. temperature 100 °C
Sterilization methods yes, autoclavable
Ident. No.
 		   3433312
Price   USD 29.00
　
    
S10 D - 7G - KS - 110
Working range 1 - 40 ml
Stator diameter 7 mm
Rotor diameter 4,8 mm
Circumferential speed (30.000 rpm) 7,5 m/s
Min. / max. immersion depth 20 / 90 mm
Shaft length 110 mm
Materials in contact with medium Polycarbonate (PC), Polysulfon (PSU)
Max. temperature 100 °C
Sterilization methods yes, autoclavable
Ident. No.
 		   3433325
Price   USD 53.00
　
    
S 25 D - 14 G - KS
Working range 10 - 500 ml
Stator diameter 14 mm
Rotor diameter 9,5 mm
Circumferential speed (30.000 rpm) 12 m/s
Min. / max. immersion depth 15 / 85 mm
Shaft length 150 mm
Materials in contact with medium Polycarbonate (PC), Polyetheretherketon (PEEK)
Max. temperature 100 °C
Sterilization methods yes, autoclavable

incl. 1 Disposable tube
Plastic materials used approved by FDA.
Ident. No.
 		   3451700
Price   USD 78.00
　
    
S 25 D - 10 G - KS
Working range 10 - 100 ml
Stator diameter 10 mm
Rotor diameter 6,75 mm
Circumferential speed (30.000 rpm) 8,5 m/s
Min. / max. immersion depth 15 / 85 mm
Shaft length 150 mm
Materials in contact with medium Polycarbonate (PC), Polyetheretherketon (PEEK)
Max. temperature 100 °C
Sterilization methods yes, autoclavable

incl. 1 Disposable tube
Plastic materials used approved by FDA.  
Ident. No.
 		   3451800
Price   USD 78.00
　
    
S 18 D - 14 G - KS
Working range 10 - 500 ml
Stator diameter 14 mm
Rotor diameter 9,5 mm
Circumferential speed (30.000 rpm) 12 m/s
Min. / max. immersion depth 15 / 85 mm
Shaft length 150 mm
Materials in contact with medium Polycarbonate (PC), Polyetheretherketon (PEEK)
Max. temperature 100 °C
Sterilization methods yes, autoclavable

incl. 1 Disposable tube
Plastic materials used approved by FDA.
Ident. No.
 		   3451900
Price   USD 78.00
　
    
S 18 D - 10 G - KS
Working range 10 - 100 ml
Stator diameter 10 mm
Rotor diameter 6,75 mm
Circumferential speed (30.000 rpm) 8,5 m/s
Min. / max. immersion depth 15 / 85 mm
Shaft length 150 mm
Materials in contact with medium Polycarbonate (PC), Polyetheretherketon (PEEK)
Max. temperature 100 °C
Sterilization methods yes, autoclavable

incl. 1 Disposable tube
Plastic materials used approved by FDA.
Ident. No.
 		   3452000
Price   USD 78.00
　
    
S 25 D - 14 G - KS
Working range 10 - 500 ml
Stator diameter 14 mm
Rotor diameter 9,5 mm
Circumferential speed (30.000 rpm) 12 m/s
Min. / max. immersion depth 15 / 85 mm
Shaft length 150 mm
Materials in contact with medium Polycarbonate (PC), Polyetheretherketon (PEEK)
Max. temperature 100 °C
Sterilization methods yes, autoclavable

incl. 1 Disposable tube
Plastic materials used approved by FDA.
Ident. No.
 		   3452100
Price   USD 130.00
　
    
S 25 D - 10 G - KS
Working range 10 - 100 ml
Stator diameter 10 mm
Rotor diameter 6,75 mm
Circumferential speed (30.000 rpm) 8,5 m/s
Min. / max. immersion depth 15 / 85 mm
Shaft length 150 mm
Materials in contact with medium Polycarbonate (PC), Polyetheretherketon (PEEK)
Max. temperature 100 °C
Sterilization methods yes, autoclavable

incl. 1 Disposable tube
Plastic materials used approved by FDA.
Ident. No.
 		   3452200
Price   USD 130.00
　
    
S 18 D - 14 G - KS
Working range 10 - 500 ml
Stator diameter 14 mm
Rotor diameter 9,5 mm
Circumferential speed (30.000 rpm) 12 m/s
Min. / max. immersion depth 15 / 85 mm
Shaft length 150 mm
Materials in contact with medium Polycarbonate (PC), Polyetheretherketon (PEEK)
Max. temperature 100 °C
Sterilization methods yes, autoclavable

incl. 1 Disposable tube
Plastic materials used approved by FDA.
Ident. No.
 		   3452300
Price   USD 130.00
　
    
S 18 D - 10 G - KS
Working range 10 - 100 ml
Stator diameter 10 mm
Rotor diameter 6,75 mm
Circumferential speed (30.000 rpm) 8,5 m/s
Min. / max. immersion depth 15 / 85 mm
Shaft length 150 mm
Materials in contact with medium Polycarbonate (PC), Polyetheretherketon (PEEK)
Max. temperature 100 °C
Sterilization methods yes, autoclavable

incl. 1 Disposable tube
Plastic materials used approved by FDA.
Ident. No.
 		   3452400
Price   USD 130.00
　
    
S 8 N - 5 G Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   2969000
Price   USD 903.00
　
    
S 8 N - 8 G Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   2560000
Price   USD 681.00
　
    
T 8.10 Dispersion station
Allows the T 8 to be used as a stand-supported device.
- Used to hold dispersing elements
- Sterilizable, removable working surface
- Serves as a protective cover for the power pack 
Ident. No.
 		   2602500
Price   USD 903.00
　
    
S 18 N - 10 G Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   L004639
Price   USD 551.00
　
    
S 18 N - 19 G Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   L004640
Price   USD 551.00
　
    
S 25 N - 8 G Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   1024200
Price   USD 719.00
　
    
S 25 N - 10 G Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   0594000
Price   USD 484.00
　
    
S 25 N - 10 G - VS Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   1899000
Price   USD 837.00
　
    
S 25 N - 18 G Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   0593400
Price   USD 513.00
　
    
S 25 N - 25 G Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   1713300
Price   USD 614.00
　
    
S 25 N - 25 F Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   1713800
Price   USD 654.00
　
    
S 25 NK - 19 G Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   2494700
Price   USD 521.00
　
    
S 25 KR - 18 G Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.  
Ident. No.
 		   0560300
Price   USD 677.00
　
    
S 25 KR - 25 G Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   1713400
Price   USD 819.00
　
    
S 25 KR - 25 F Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   1713900
Price   USD 835.00
　
    
S 25 KV - 18 G Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   2348000
Price   USD 1,086.00
　
    
S 25 KV - 25 G Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   2466900
Price   USD 1,114.00
　
    
S 25 KV - 25 F Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   2404000
Price   USD 1,114.00
　
    
S 25 KV - 25 G - IL Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   2563000
Price   USD 1,144.00
　
    
S 25 KV - 25 F - IL Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   2830200
Price   USD 1,144.00
　
    
SW 18 Slab rotor
Additional rotor for dispersing elements S 25 N - 18 G, S 25 KR - 18 G, S 25 KV - 18 G
Ident. No.
 		   8011900
Price   USD 238.00
　
    
SV NS 29 Screw cap
For dispersing operations (use seal types KR and KV) in ground section apparatus and for operations under hermetically sealed conditions or in a protective gas atmosphere (for dispersion elements used with the T 25 basic).
 
Ident. No.
 		   0767700
Price   On Request
　
    
S 50 N - G 45 G Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   8003000
Price   USD 1,177.00
　
    
S 50 N - G 45 M Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   8003300
Price   USD 1,295.00
　
    
S 50 N - G 45 F Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   8003900
Price   USD 1,413.00
　
    
S 50 KR - G 45 G Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   8003100
Price   USD 1,516.00
　
    
S 50 KR - G 45 M Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   8003400
Price   USD 1,660.00
　
    
S 50 KR - G 45 F Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.  
Ident. No.
 		   8004000
Price   USD 1,716.00
　
    
S 50 KG - HH - G 45 G Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   8003200
Price   USD 2,224.00
　
    
S 50 KG - HH - G 45 M Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.  
Ident. No.
 		   8003500
Price   USD 2,371.00
　
    
S 50 KG - HH - G 45 F Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   8004100
Price   USD 2,378.00
　
    
S 50 KV - G 45 G - IL Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   8015800
Price   USD 2,216.00
　
    
S 65 KG - HH - G 65 G Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   8005500
Price   USD 5,066.00
　
    
S 65 KG - HH - G 65 M Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   8005700
Price   USD 5,270.00
　
    
S 65 KG - HH - G 65 F Dispersing element
The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.
Ident. No.
 		   8005900
Price   USD 5,270.00
　
    
R 50 stirring shaft "high speed"
With the stirring shaft R 50, the T 50 basic is quickly converted into a high speed stirrer. 700 W and 10,000 rpm are provided for rapid mixing, dissolving, and disagglomerating pigment agglomerates. The conical shaft is supported by means of ball bearings, the mixing elements have a screw connection. For operational safety a protective cage is fitted around the mixing element.
Ident. No.
 		   1689300
Price   USD 1,023.00
　
    
R 1405 Propeller
Ident. No.
 		   1289800
Price   USD 130.00
　
    
R 1402 Dissolver
Ident. No.
 		   1243300
Price   USD 177.00
　
    
S 50 N - W 80 SMK Jet mixer head
For shortening mixing and dissolving times. The vertical flow and the high circumferential speed up to 10,000 rpm ensure intensive mixing. The head is used for adding gases or liquids, for lump-free suspension of difficult to dissolve powders or for dissolving sedimented, already hardened substances.
Ident. No.
 		   8006300
Price   USD 1,530.00
　
    
S 50 KR - W 80 SMK Jet mixer head
For shortening mixing and dissolving times. The vertical flow and the high circumferential speed up to 10,000 rpm ensure intensive mixing. The head is used for adding gases or liquids, for lump-free suspension of difficult to dissolve powders or for dissolving sedimented, already hardened substances.
Ident. No.
 		   8006400
Price   USD 1,587.00
　
    
S 50 N - W 65 SK Cutting head
To crush large pieces (up to 50 mm) of fibrous materials, such as vegetation, vegetables and fruit.
Ident. No.
 		   8005100
Price   USD 1,637.00
　
    
DK 25.11 Flow chamber
For S 25 KV - 25 ... - IL dispersing elements. Allows inline operation mode, see UTL 25 basic.
Batch operation:
DK 25.11 is mounted around the dispersing element. The DK 25.11 must be at a lower elevation than the surface of the liquid during operation. With this operating mode, no air is drawn in as a result of turbulence in the vessel.
Ident. No.
 		   2518000
Price   USD 1,088.00
　
    
AD 25
Mounting support for DK 25.11
Ident. No.
 		   2562500
Price   USD 331.00
　
    
DK 50.11 Flow chamber
For S 50 KV - G 45 ... - IL dispersing elements. Allows operation in inline mode, see UTL 50 basic.
If used in batch mode: DK 50.11 is mounted around the dispersing element. The DK 50.11 must be at a lower elevation than the surface of the liquid during operation. With this operating mode, no air is drawn in as a result of turbulence in the vessel.
Ident. No.
 		   2810000
Price   USD 1,470.00
　
    
T 653 Telescopic stand
Specially designed for the dispersing instrument T 65. The stand is equipped with a pneumatic spring which enables effortless raising and lowering of the dispersion unit.

Diameter of support rod: 48 mm
Dimensions (W x D): 460 x 530 mm
Height: 1200 mm
Stroke: 500 - 1000 mm
Ident. No.
 		   1608000
Price   USD 2,210.00
　
    
R 1826 Plate stand
With slip resistant foil.

Diameter of support rod: 16 mm
Max. load: 5 kg
Dimensions (W x D): 200 x 316 mm
Height: 800 mm
Ident. No.
 		   3160100
Price   USD 188.00
　
    
R 1827 Plate stand
With slip resistant foil.

Diameter of support rod: 16 mm
Max. load: 5 kg
Dimensions (W x D): 200 x 316 mm
Height: 1000 mm
　
Ident. No.
 		   3160200
Price   USD 206.00
　
    
R 270 Boss head clamp
Clamping range - stand: 25 - 36 mm
Clamping range - extension arm: 5 - 21 mm
Material: cast aluminium
　
Ident. No.
 		   2657800
Price   USD 60.00
　
    
R 2722 H-Stand
Particularly stable stand with H-shape base which prevents the stand from tipping backwards. Provides optimum stability required for larger, heavier instruments and attachments, for example with rheological measurements using overhead stirrers. The stand has an adjustment screw which can be used to compensate for an uneven laboratory table surface.

Diameter of support rod: 34 mm
Dimensions (W x D): 460 x 420 mm
Height: 1010 mm
Max. load: 10 kg
Ident. No.
 		   1412000
Price   USD 494.00
　
    
R 2723 Telescopic stand
Particularly stable stand with H-shape base which prevents the stand from tipping backwards. Additionally equipped with a pneumatic spring stand rod, which enables heavy instruments / attachments to be raised and lowered smoothly without difficulty, e.g. with rheological measurements using overhead stirrers. The stand has an adjustment screw which can be used to compensate for an uneven laboratory table surface.

Diameter of support rod: 34 mm
Dimensions (W x D): 460 x 420 mm
Height: 620 - 1010 mm
Max. load: 10 kg
Stroke: 390 mm
Ident. No.
 		   1412100
Price   USD 504.00
　
    
RH 5 Strap clamp
For securing vessels against walls or for synchronized rotation during stirring or dispersing, incl. boss head clamp R 270.
Ident. No.
 		   3159000
Price   USD 183.00
　
    
R 1825 Plate stand
With slip resistant foil.

Diameter of support rod: 16 mm
Max. load: 5 kg
Dimensions (W x D): 200 x 316 mm
Height: 560 mm
Ident. No.
 		   3160000
Price   USD 172.00
　
    
R 271 Boss head clamp
Specialized clamp with openings for the stands R 2722 and R 2723 as well as extensions with Ø 16 mm.

Clamping range - stand: 34 mm
Clamping range - extension arm: 16 mm
Material: cast aluminium
Ident. No.
 		   2664000
Price   USD 45.00
　
    
R 182 Boss head clamp
Clamping range - stand: 6 - 16 mm
Clamping range - extension arm: 6 - 16 mm
Material: cast aluminium
Ident. No.
 		   2657700
Price   USD 17.00
　
    
RH 3 Strap clamp
For securing vessels against walls or for synchronized rotation during stirring or dispersing.
Ident. No.
 		   3008600
Price   USD 147.00
　
    
DZM control.o Revolution counter
Connection of an opto-electronic sensor enables measurement of the speed of rotating shafts from 0 - 50,000 rpm.
The signals received are displayed on the monitor. This enables all IKA overhead stirrers and dispersing instruments to be retrofitted with a speed display, thereby allowing reproducible work. An RS 232 interface allows the values to be recorded digital on a PC. An analog output signal for a recorder is also available. The monitor can be used as a table-top device or mounted on a stand rod.
Ident. No.
 		   8014200
Price   USD 821.00