|
Specific information on grid
ordering: Thickness, Finish, Packaging, Material Code, PELCO® Grid
Specs |
PELCO GRIDS are somewhat thicker than most grids and
provide a stiff wide rim 50, 75, 100 Mesh 150, 200, 300 Mesh 400, 500
Mesh, Slot, Hole Honeycomb Mesh |
|
Chien Grids |
REFERENCE / FINDER GRIDS (Maxtaform,
Micron Index, Gilder Reference, PELCO® Pinpointer and Coordinate Grids |
ATHENE GRIDS Athene Grids part 1: Introduction, 50, 150, 200 Mesh Athene Grids part 2: 300, 400 Mesh, Honeycomb, Slot |
GILDER GRIDS Gilder Grids part 1: Introduction, 50, 75, 100, 150, 200 Mesh Gilder Grids
part 2: 300, 400, 600, 1000, 2000 Mesh Gilder Grids
part 3: Honeycomb Mesh, Special Holes and Slotted
Pattern |
Veco Grids Veco Grids part 1: Introduction, Center Reference, Handle Grids, Thick-Thin Bars,
Slotted Pattern Veco Grids part 2: Hexagonal
Grids Veco Grids part 3: Hole
and Slot Grids |
Maxtaform™ Grids Maxtaform™ Special, Micron Index, Asbestos and Locater
Grids |
SynapTek™ Grids and GridStick |
Beryllium Planchets |
Pyrolytic Carbon
Grids |
Substrate, Support Films;
NetMesh Grids, Lacey Support Films QUANTIFOIL Substrates |
Grid Storage Boxes Grid Storage Files (wooden cabinets for holding Storage
Boxes)
|
Grid Tweezers Grid Tab Nipper |
Vacuum Pick-Up System, Pen-Vac Tweezer White Tile, a smooth white surface for sorting
grids Wire Mesh Screening, Gold, Stainless Steel,
Nylon Mesh |
Grid Coating: "Grid Coating Pen and Grid
Coating Plates |
Staining: Grid Holder and Staining
Pads New PELCO Grid Staining Matrix
System Staining Dishes Microwell Staining Molds Parafilm M® Laboratory Film (picks up film and grids from
liquid, good for single drop staining) |
Thickness: PELCO® grids are usually thicker than
similar mesh grids.
Finish: Copper, Nickel and Gold grids have a matt finish on one side
and a shiny finish on the other side.
Packaging: 100 grids per vial/tube, except for specials which are
listed accordingly. Gold, Titanium, Molybdenum and Aluminum grids are packaged
in 25's. Beryllium is packaged as a single grid. A new special treated black
plastic vial that resists static, is used for Gilder Grids.
From the drawing above, the hole and bar widths are shown. Sometimes "pitch"
is used in this terminology and it is the equivalent of hole width plus bar
width. |
Material |
Code |
Copper |
C |
Nickel |
N |
Gold |
G |
Aluminum |
A |
Molybdenum |
M |
Titanium |
T |
Beryllium |
X |
Carbon |
No Notation |
Beryllium-Copper |
base material for SynapTek ™
Grids |
PELCO® Grids |
Square Mesh |
Pitch µm |
Hole µm |
Bar µm |
% Trans-mission |
50 |
508 |
425 |
83 |
70 |
75 |
339 |
284 |
55 |
70 |
100 |
254 |
204 |
50 |
65 |
150 |
169 |
125 |
44 |
60 |
200 |
127 |
90 |
37 |
50 |
300 |
85 |
54 |
31 |
40 |
400 |
64 |
38 |
26 |
35 |
500 |
51 |
28 |
23 |
30 | | back up
Copyright © Ted Pella, Inc.,
February 27, 2004. All rights reserved. All
trademarks are the property of their respective owners.
|
|
|
|