::: " NASCO " : 계면측정기 The Sludge Judge Series, liquid / Sludge Sampling, 2-1/2 ft. - Top Section with Rope, Whirl-Pak Sampling Products C09247WA 15-ft., 4.60 m Water Core Sampler. :::

       
       
       
 
 

" NASCO " : 계면측정기 The Sludge Judge Series, liquid / Sludge Sampling, 2-1/2 ft. - Top Section with Rope, Whirl-Pak Sampling Products C09247WA 15-ft., 4.60 m Water Core Sampler.

 

 ■ 제조국 / 제조사 ■ Korea / 대한과학
 ■상품명 ■ 계면측정기The Sludge Judge
 ■ 짧은 소개 ■ 계면측정기The Sludge Judge 2-1/2 ft

■  규격 (Specifications)
 

Product Number

 Description

C14516WA

The Sludge Judge 2-1/2 ft. - Top Section with Rope

The Sludge Judge® is designed to take accurate readings of settled solids, 5% or less, in a variety of liquids, to any depth. It is ideal for sewage treatment plants, chemical plants, and food processing facilities - anywhere that accurate sample levels of settled solids in noncaustic materials are needed. The unit holds approximately 3 oz. per foot, 89 ml per 0.31 m. The Sludge Judge® comes in 5 ft. 1.53m sections of 3/4", 1.90 cm plastic pipe with screw-type connectors. The top section includes a nylon line for raising and lowering the sampler. Individual sections can be combined as required to achieve the length needed. Do not use in liquids over 165ºF, 74ºC. A convenient cotton canvas carrying case, that holds four sections, a cleaning brush, a new cleaning rod, and cotton strips are available.
To use:

1 . Slowly lower the Sludge Judge® to the bottom of the tank.
A.
The float valve opens (see picture A), allowing materials to flow in. When the bottom has been reached and the pipe has filled to the surface level, tug slightly on the rope as the unit is raised.
B.
This sets the check valve (see picture B) trapping the mixture inside.

2.

When the unit has been raised clear of the liquid, the amount of solids in the sample can be read using the 1ft., 0.31 in increments marked on the pipe sections.

3.

To release the material in the unit, touch the pin extending from the bottom section against a hard surface. This opens the check valve to drain the sample.

C09247WA 15-ft., 4.60 m Water Core Sampler. Contains three sections. Sh. wt. 3.13 lbs., 1.50 kg.

C09249WA Case for Sampler. Sh. wt. 0.50 lbs., 0.30 kg.

Separate Sections

C09250WA 5 ft., 1.53 m Bottom Section with Valve.
Sh. wt. 1.38 lbs., 0.70 kg.C09251WA 5 ft., 1.53 m Extension Sections.
Sh. wt. 1.38 lbs., 0.70 kg.C09252WA 5-ft., 1.53 m Top Section with Rope.
Sh. wt. 1.25 lbs., 0.60 kg.C14516WA 2 ½-ft., 0.08 m Top Section with Rope.
Sh. wt. 0.50 lbs., 0.30 kg.
BO1291WA 6ft., 1.83 m Cleaing Brush.
0.75 lbs., 0.34 kg.


 

Nasco Cleaning Rod
For cleaning greasy residue from the Sluge Judge, this cleaning rod is designed to make the job go quick and easy. The 3/8", 0.93 cm solid aluminum two-piece rod screws together giving 6 ft., 1.82m of length, and the slot on the ends holds a thick cotton strip (sold separately) in place. Slide the cloth up and down the tube using a mild detergent and warm water. Sh. wt. 0.94lbs.

B01412WA
B01413WA Bag of 50 Cotton Strips.
2" x 12", 5.1 x 30.5 cm, sh. wt. 7oz., 0.20 kg.

The Sludge Judge®  II - Large Capacity
 
The Sludge Judge® II is made from a 1¼", 3.18 cm outside diameter plastic tubing resulting in double the capacity and a very rigid unit when assembled. It holds 6 oz. per foot, 178 ml/.31 m and can be assembled according to the requirements of the job. Add or subtract sections as needed, and the 1 -ft., .31 m markers on the tubing will help identify both the depth of the tank and the amount of sludge on the bottom. The unit is made up of three 5-ft., 1.53 m sections (top, extension, bottom) or individual sections can be combined as required. Cleaning brush listed below and carrying case shown on the above can be used with this unit. This way the NEW Nasco cleaning rod, and cotton strips listed below are designed for cleaning greasy/oily residue from inside the tubing.

B01355WA Sludge Judge' II Sh. wt. 3.38 lbs., 1.60 kg.
B01356WA 5 ft., 1.53 m Bottom Section. Sh. wt. 1.25 lbs., 0.60 kg.
B01357WA 5 ft., 1.53 m Extension Section. Sh. wt. 1.25 lbs., 0.60 kg.
B01358WA 5 ft., 1.53 m Top Section. Sh. wt. 1.38 lbs., 0.70 kg.
B01361WA 6 ft., 1.83 m Cleaning brush. Sh. wt. 1.25 lbs., 0.57 kg.
B01414WA Bag of 50 Cotton Strips. 3" x 12", 7.6 x 30.5 cm, Sh. Wt. 0.56 lbs., 0.26 kg.


The Sludge Judge® Ultra - Super Strong
 

 

For maximum strength and rigidity - use the Sludge Judge® Ultra! It is constructed of extremely strong polycarbonate and treated with an ultraviolet stabilizer to help reduce deterioration from the sun's harmful rays. The mate rial is very rigid, minimizing bending of the unit when it is full of water or other liquids. Durable in cold temperatures; can withstand heat up to 280º F, 138º C (with careful handling). The ¾" 1.9 cm diameter tubing is marked with blue tape to designate 1 ft., .31 m measurements on the tubing. Unit is made up of three 5-ft., 1.53-m sections (top, extension, bottom). Individual sections can be combined as required. The carrying case, cleaning brush, NEW Nasco cleaning rod and cotton strips shown on page 24 can be used with this unit. 1.42 kg.

B01386WA Sludge Judge Ultra
Sh. wt. 3.13 lbs., 1.9 cm.
Separate Sections
B01387WA 5 ft., 1.53 m. Top Section.
Sh. wt. 1.25 lbs., 0.57 kg.
B01388WA 5 ft., 1.53 m. Extension Section.
Sh. wt. 1.38 lbs., 0.63 kg.
B01389WA 5 ft., 1.53 m. Bottom Section.
Sh. wt. 1.38 lbs., 0.63 kg.

 
 

Settleometer Kit
This kit is designed to measure sludge settling characteristics. It includes a clear plastic settleometer, wide mixing paddle, snap-on lid, and complete instructions. Calibrated in percent and settled sludge volume (SSV). Bright, white markings contrast vividly with dark sludges, allowing easy-to-read interface. Yields information which closely approximates settling ng in secondary y clarifiers and aerobic digesters. Sh. wt. 1.06 lbs., 0.49 kg.
B01173WA

　

CAT No. Description 단위/갯수 Price[VAT포함]

가격문의