제품 자세히 보기

::: "DAIHAN" 초자기구 세척기(Washing Machine) :::

새 페이지 1

초자기구 세척기

4. Accessories

Injection System I.

Product
	1) Flask Washer LM40 Universal jet trolley for washing narrow-necked glassware, round bottom flasks and measuring cyliders. Eight different sizes of interchangeable nozzles. Maximum capacity 40 items.
	2) Injection Trolley Nozzles Available in the following versions : 6% and 12% butyrometer nozzle, pipette nozzle, nozzles for glassware with the following height measurements : 90, 110, 140, 160, 180, 220, 240, 260 mm.

	3) Drying System Accessories The Accessories used on drying system models (Quick drying system using forced air) are identified by the DS suffix showing that the accessories include a connection for air injection through the trolley water circuit.
	4) LM80 Flask Washer on 2 levels Two-level trolley for washing narrow-necked glassware by internal injection. Capacity 68 items, for glassware with a maximum height of 225mm. Standard equipment includes 140mm height nozzles LM 80DS : two-level flask washer with drying system connection (not shown)

초자기구 세척기

4. Accessories

Injection System II.

Product
	1) LM20 Flask Washer Universal flask washing trolley with 20 nozzles on hlf the trolley. The other half is free for a mixed load and can contain a 1/2 basket a accessory • LM20 DS Flask Washer (not shown) Version with drying air connection
	2) LPM 20/20 Injection washing trolley for both pipettes and flasks. It has 20 positions for pipettes with height measurements of up to 550 mm and 20 positions for narrow necked glassware with a maximum height of 49cm • LPM20/20DS Flask/pipette trolley with drying system connection (not shown)
	3) LM40S top flask washing trolley Trolley for washing narrow-necked glassware by internal injection. It is positioned on the top level of the machine. Capacity 40 items for glassware with a maximum height of 225mm. Standard equipment includes 140mm height nozzles. • LM40S-DS Version with drying system connection (see photo)
	4) LB8 Trolley for washing large items of glassware Special trolley for washing large bottles, flasks and beakers with a maximum height of 49cm. It has a support to hold 8 bottles/flasks. Supplied with special nozzles.
	5) LR4 Reactor Washing Trolley with 20 nozzles able to wash the inside of 5-way reactors and narrow necked glassware. Supplied with twenty 220mm long nozzles. • LR4 DS Version with drying system connection (not shown)
	6) LT20 Fischer flask washing trolley Trolley for washing 12 Fischer flasks and graduated cylinders of maximum height 55cm. Complete with 6 positions for injection washing of narrow-necked glassware.
	7) LB16 Trolley for injection washing of infusion bottles for pharmaceutical use. it can be used to wash 16 bottles of capacity greater than 1 litre. • LBS16DS Version with Drying system connection (not shown)
	8) LB32 Trolley for injection washin gof infusion bottles for pharmaceutical use. It can be used to wash 32 bottles of capacity up to one litre and of maximum height 245mm. It consists of two sections; the upper section can be used on its own if necessary. • LB32DS Version with Drying System connection (not shown)
	9) LPV40:Pipette Washer Trolley for washing volumetric pipettes measuring up to 55cm in length. it has 20 positions for 55cm long pipettes and 20 positions for 45-49cm pipettes. • LPV 40DS Pipette washer with drying system connection (not shown)
	10) KP100 injection trolley for test tubes Trolley for washing tapering and straight test tubes by internal injection. Max capacity 100 test tubes. The trolley must be set in the top washing level. • KP100DS Trolley for tapering test tubes featuring drying system connection (not shown)
	11) KP200 injection trolley for test tubes. Two-level trolley for washing tapering and straight test tubes by internal injection Max. Capacity 200 test tubes. • KP200DS Trolley for tapering test tubes with drying system connection (not shown)
	12) LPT100 Pipette trolley Accessory to wash 100 pipettes with 1 to 20ml capacities and height of up to 450mm. The pipette disk must be fitted onto a trolley for quick loading and unloading access. • LPT100DS Pipette trolley with drying system connection (not shown)

초자기구 세척기

4. Accessories

Baskets and Supports

Product
	1) CS1 Universal top basket with sprayer for holding the various glassware supports
	2) CS2 Universal bottom basket for the various glassware supports
	3) SB15 Universal Erlenmeyer flask/beaker accessory. Support to hold Erlenmeyer flasks, beakers etc. to be used in conjunction either with standard baskets CS1 and CS2 or with LM20. Capacity 16 items. Recommended for Erlenmeyer flasks of cpacity up to 1000ml.
	4) SB25 Universal Erlenmeyer flask/beaker accessory. Support to hold Erlenmeyer flasks, beakers etc. to be used in conjunction either with standard baskets CS1 and CS2 or with LM20. Capacity 28 items. Recommended for Erlenmeyer flasks of cpacity up to 500ml.
	5) SB28 Universal Erlenmeyer flask/beaker accessory. Support to hold Erlenmeyer flasks, beakers etc. to be used in conjunction either with standard baskets CS1 and CS2 or with LM20. Capacity 28 items. Recommended for Erlenmeyer flasks of cpacity up to 1000ml.
	6) SB30 Universal beaker accessory. Support to hold beakers of any dimensions to be used in conjunction either with standard baskets CS1 and CS2 or with LM20. Recommended for beakers of capacity less than 500ml.
	7) SL9 Universal plate support for positioning flat material. Size 1/2 standard basket.
	8) SL18 Standard 20x20 chromatography plate support. Designed Specifically for chromatography plates. Capacity 18 items. The guides are shaped in such a way that the resting points lie outside the plate surface.
	9) PD100S Petri dish holder which can be positioned either on the upper level of the PD100I or directly on baskets CS1 or CS2. Capacity 38 dishes of diameter 70-120mm.
	10) PD100L Petri dish holder which can be positioned on the lower standard basket CS2. Equipped with supports to hold one PD100S on the Upper level (see photo). Capacity 42 dishes of diameter 60-120mm
	11) PD100S + PD100I The combined PD100S + PD100I unit shown in the photo is positioned on the bottom level (basket CS2)
	12) Test Tube Baskets Additional accessories for standard baskets CS1, CS2 and LM20 used to wash analysis test tubes. Capacity about 160 standard test tubes, equipped with 3 removable compartments and lid. The baskets take up 1/4 of a standard baket and are available in four standardized sizes. • CP105 : test tubes up to 75mm in height • CP132 : test tubes up to 105mm in height • CP192 : test tubes up to 165mm in height • CP222 : test tubes up to 200mm in height

13) Bottom Racks

Accessories in flat AISI 304 stainless steel mesh for use with baskets CS1 and CS2 as thick mesh supports for small glass items or as rigid supports as an alternative to nylon nettings. Available in 5 versions : PF1 complete bottom rack with hole for positioning on top level; PF2 complete bottom rack for positioning on bottom level only; CPF1 complete flat bottom basket (not shown); PF1/2 half bottom rack;CPF 1/2 half bottom baket;CSK1/3DIN steel mesh basket to hold small items

14) Fixing Nets
	Fixing nets with plasticized metal edges and nylon mesh, used to hold small glassware items in place in standard baskets CS1 and CS2. Available in three models : RC1 complete net, RC1/2 net for half-basket, RC1/4 net for quarter-basket.

초자기구 세척기

4. Accessories

Detergents

• POWDERED ALKALINE DETERGENTS
- DETERGLASS : Universal powdered alkaline detergent, 10kg pack
- DETERGLASS SP : Universal powdered alkaline detergent, 10kg pck, phosphate-free.

• LIQUID ALKALINE DETERGENTS
- DETERLIQUID C : Universal liquid alkaline detergent, 5 litre plastic container.
- DETERLIQUID C1 : Strong Universal liquid alkaline detergent, 5 litre plastic container.
- DETERLIQUID D : Universal liquid alkaline detergent, 12 litre plastic container.
- DETERLIQUID D1 : Strong Universal liquid alkaline detergent, 5 litre plastic container.
- DETERLIQUID SP : Strong Universal liquid alkaline detergent, 5 litre container, phosphate-free

• ACID NEUTRALIZERS
- ACIDGLASS P : neutralizing acid detergent, 6 litre plastic container.
- ACIDGLASS P1 : strong neutralizing acid detergent, 5 litre plastic container.
- ACIDGLASS C : neutralizing acid detergent, 5 litre container, phosphate-free
- ACIDGLASS C1 : strong neutralizing acid detergent, 5 litre plastic container, phosphate-free

• SPECIAL ADDITIVES
- STREPTOBAT : Alkaline disinfectant for thermochemical disinfection cycles at 60℃, 5 litre
plastic contriner, phosphate-free.
- LUB MILK : Protective lubricating emulsion for stainless steel instruments, 5 litre plastic
container, phosphate-free.
- F1S : Defoaming additive for "petrol" cycles. Blocks saponification reactions in washing cycles with addition of caustic soda. 1 litre container.
- K1S : Surfactant ; to be added to the final rinse in rubber and plastic materials treatment
cycles. 1 litre container.

Ask for the detergent sheets illustrating recommended uses and methods.

초자기구 세척기

1. GW3050

GW3050
- is designed to operate with 1 or 2 levels for treating various types of substance.
- Standard washing chamber 52x51x54cm;
- Possibility of washing, disinfecting and drying in a forced vaccum

Characterisitics

• Washing tank/door in AISI 316L acid-resistant chrome-nickel-molybdenum stainless steel
• Outer Panels in AISI 304 stainless steel
• External dimensions : LxDxH 600x600x850
• Useful tank dimensions : LxDxH 520x515x545
• No. of washing levels with injection trolleys : 1 -2
• No. of washing levels with rotating sprayer trolleys : 2
• No. of washing levels with sprayer and injection trolleyes : 2

• Total washing surface : 0.52 m2
• Electronic programming
• Memory capacity for 30 programs
• Screen dialogue messages : 2 lines x 20 characters
• Recirculation pump : 400 l/min
• 1 peristaltic pumf for alkaline liquid detergent
• 1 peristaltic pumf for neutralizer
• 2 auxiliary additive pumps available on request
• Powdered detergent. Dispenser available on request
• Separae 1-10 bar cold, hot and demineralized water supplies

• Non-pressurized demineralized water : Optional supplementary pump available on request
• Water consumption : 8-10 1 per phase (depending on trolley used)
• Built-in water softener with automatic volumetric regeneration
• Regheneration salt refill with signalling on display
• Monitoring of cycle in progress with phase sequence shown on display
• Temperature control with internal temperature continually shown on display
• Safety features : open door washing stop, water level control, heating safety, error message display, mechanical safety lock

• Water heating 3 selectable heating elements
• Forced vaccum drying
• Steam condenser on request

초자기구 세척기

2. GW4050

GW4050
- is designed to operate with 1 or 2 levels for treating various types of substance.
- Standard washing chamber 52x51x54cm;
- Possibility of washing, disinfecting and drying in a forced vaccum

Characterisitics

• Washing tank/door in AISI 316L acid-resistant chrome-nickel-molybdenum stainless steel
• External panels in AISI 304 stainless steel
• External dimensions : LxDxH 900x630x850
• Useful tank dimensions : LxDxH 520x515x545
• No. of washing levels with injection trolleys : 1 -2
• No. of washing levels with rotating sprayer trolleys : 2
• No. of washing levels with sprayer and injection trolleyes : 2

• Total washing surface : 0.52 m2
• Electronic programming
• Memory capacity for 30 programs
• Screen dialogue messages : 2 lines x 20 characters
• Recirculation pump : 400 l/min
• 1 peristaltic pumf for alkaline liquid detergent
• 1 peristaltic pumf for neutralizer
• 2 auxiliary additive pumps available on request
• Built-in detergent cabinet capable of holding two 5-litre or four 2-litre containers
• Powdered detergent. Dispenser available on request
• Separae 1-10 bar cold, hot and demineralized water supplies

• Non-pressurized demineralized water : supplementary pump available on request
• Water consumption : 8-10 I per phase (depending on trolley used)
• Built-in water softener with automatic volumetric regeneration
• Regheneration salt refill with signalling on display
• Monitoring of cycle in progress with phase sequence display
• Temperature control with internal temperature display
• Safety features : open door washing stop, water level control, heating safety, error message display, mechanical safety lock

• Drying System
• Water heating 3 selectable heating elements
• 98% DOP class C drying filter
• 1.8kW heater
• 0.4kW dryer fan motor
• Steam condenser on request

초자기구 세척기

3. GW5050

GW5050
- is a complete top-of-the-range machine designed to operate with 1 or 2 levels and to treat difficult or hazardous substances
(petrochemical residues) in complete safety.

- Standard washing chamber 52x51x54cm;
- Possibility of washing, disinfecting and drying in a forced vaccum

Characterisitics

• Washing tank/door in AISI 316L acid-resistant chrome-nickel-molybdenum stainless steel
• External panels in AISI 304 stainless steel
• External dimensions : LxDxH 900x630x850
• Useful tank dimensions : LxDxH 520x515x545
• No. of washing levels with injection trolleys : 1 -2
• No. of washing levels with rotating sprayer trolleys : 2
• No. of washing levels with sprayer and injection trolleyes : 2

• Total washing surface : 0.52 m2
• Electronic programming
• Memory capacity for 30 programs
• Screen dialogue messages : 2 lines x 20 characters
• Recirculation pump : 400 l/min
• 1 peristaltic pumf for alkaline liquid detergent
• 1 peristaltic pumf for neutralizer
• 2 auxiliary additive pumps
• Built-in detergent cabinet capable of holding two 5-litre or four 2-litre containers
• Powdered detergent. Dispenser available on request
• Separae 1-10 bar cold, hot and demineralized water supplies

• Non-pressurized demineralized water : optional supplementary pump available on request
• Water consumption : 8-10 I per phase (depending on trolley used)
• Water softener with automatic volumetric regeneration
• Regheneration salt refill with signalling on display
• Monitoring of cycle in progress with phase sequence shown on display
• Temperature control with internal temperature shown on display
• Safety lock with active microprocessor-controlled release
• Safety features : open door washing stop, water level control, heating safety, error message display

• Drying System
• Water heating 3 selectable heating elements
• Class C 98% DOP drying filter as pre-filter
• Class S 99.99% DOP absolute drying filter
• 1.8kW heater
• 0.4kW dryer fan motor
• Built-in steam condenser

초자기구 세척기

3. GW6000DS

GW6000DS

Characterisitics

• Washing tank/door in AISI 316L acid-resistant chrome-nickel-molybdenum stainless steel
• External panels in AISI 304 stainless steel
• GW6000DS external dimensions: LxDxH (mm) 900x800x2100
• Useful tank dimensions : LxDxH    670x650x835
• Machine mounted on frame with lockable wheels to
  facilitate maintenance, cleaning and transport
• No. of washing levels with injection trolleys : 3
• No. of washing levels with rotating sprayerarms : 3
• 2 fixed sprayers for external washing
• 3 internal water connections to supply injection systems
  or additional sprayer levels

• Total washing surface : m2
• Electronic programming
• Memory capacity for 30 programs
• Screen dialogue messages : 2 lines x 20 characters
• Wash pump 900 l/min
• 1 peristaltic pumf for alkaline liquid detergent
• 1 peristaltic pumf for neutralizer
• 2 auxiliary peristaltic liquid additive pumps
• Built-in detergent cabinet capable of holding for 5-litre containers
• Powdered detergent. Dispenser available on request
• cold, hot and demineralized water supplies(3-5 bar)

• Water consumption : 30 I per phase
• Optional external water softener
• Monitoring of cycle in progress with phase sequence shown on display
• Temperature control with internal temperature shown on display
• Safety features : open door washing stop, water level control, heating safety, error message display,mechanical and electrical interlock
• Water preheeating by means of built-in 23 litre boiler
• Water heating: 6 heating elements
• A version with steram heating is available as an
  alternative to electrical heating

• Drying System
• GW6000DS:98% hop class Cair filter
• 99.99% DOP class S absolute filter
• Heating 2x1.8kW
• Fan motor 2x0.4 kW

• Power supply:
• 3 phase / neutral / earth 50 HZ 400VAC 18.5kW
•660 HZversion on request

Basic trolley for the 1st level equipped
with a grid. It may be used alone and is suitable to position various types of supports for glassware. Washing is
guaranteed by the bottom rotating spray arm.
The C61 trolley may be used to position the injectiom systems (L685/L680/L690) on the 1st level. The injection trolleys are inserted into the guide rails of the C61.

• C61

Basic trolley for the 1st level equipped
with a grid. It may be used alone and is suitable to position various types of supports for glassware. Washing is
guaranteed by the bottom rotating spray arm.
The C61 trolley may be used to position the injectiom systems (L685/L680/L690) on the 1st level. The injection trolleys are inserted into the guide rails of the C61.

• C62

Basic trolley with rotating spray arm for the 2nd and 3rd level. It may be used alone and is suitable to position various types of supports for glassware.
The system is made up of two parts:
1. Base with rotating spray arm.
2.Telescopic support with grid

• C63

Telescopic support for injection systems.
The support is used for the positioning of the injecting systems on the 2nd and 3rd levels.
The C63 is inserted into the guide rails of the wash chamber. The injection systems( L685/L680/L690 ) may be then inserted into the guide rails of the C63. The system permits the complete extraction system in order to easily load the glassware.

Multispigot injection systems
Product
	• L685 Injection system consisting of 76 spigotd for large, medium and small size of glassware. Spigot heights: 90/110/140/180/240mm. Due to the different heights of spigots it is possible to optimise the loading of various sizes of glassware. This configuration of spigots permits to use the system on both the 1st and the 2nd working levels.
	• L680 Injection system consisting of 76 spigots for medium and small size of glassware. Spigot height 140 mm. This configiguration of spigots permits to use the system on both the 1st and the 2nd working levels.
	• L690 Injection system consisting of 87 spigots for small size glassware. Spigot height 110mm. This configuration of spigots permits to use the system. on all working levels.
	• LP6 PIPETTE WASHER ADAPTER FOR 100 pipettes together with narrow necked glassware. The adapter can be screwed into position on the existing injecting systems L685 and L690. Inserting the injection system on the first level it is possible to wash pipettes up to 100ml (545mm) and glassware up to 170mm height on the third level. Inserting this accessory on the second level, standed pipettes up to 440 mm height can be wasged, using the first level for glassware up to 330 mm.