Application & Feature / 용도 및 특징 :
* 광범위한 용도 :
수분 측정이 필요한 모든 물체(시료 무게 120 g 이하)의 함유된 수분을 측정하고자
할 때 사용됨.
* 특히 식품, 의약품, 화학, 도료, 농업, 분체 산업 분야에 적합
(Laboratory & Industry)
* 적외선(Infrared) 가열 건조에 의해서 수분의 양 및 시료의 무게 측정 :
1 mg ∼ 120 g의 시료, 0 ∼ 100 % Humidity
* Application-Table 제공 :
사용 분야별 및 여러 다양한 시료의 종류별 시험법을 간결하고 쉽게 정리한 사용도표
함께 공급
* Humidity Efficient Construction / Design :
- Two infrared quartz crystal emitters 410 W.
- Sighthole for sight over sample, extremely useful during initial
adjustment
- Last value measured remains on display until being overwritten
by new measurement.
- Only 4 keys and simple user prompts on display.
* Data-Network System :
RS-232C Interface for Optical Printer(KE.911010) or PC
* 튀기거나 Open 시킬 수 없는 시료의 Sampling을 위한 다공성
Round Fiberglass Filter(KE.RHA02)가 Option으로 공급됨. 30 Piece Alum.
Sample Dish 포함.
* Drying Sequence / Switch-off Criteria :
- Fully Automatic : Drying to Constant Weight.
- Semiautomatic : Drying ends when loss per unit of time goes below
theoritical value.
- Manual : According to Adjusted Time. -1 ∼ 200 min
Check of Measure Value : Interval Adjust. Of 0.1 ∼ 10 min
Technical Specifications / 세부 기술 자료:
* Weighing System with KE.822 Balance : 120 g, 1 mg
* Dry Measurement Values:
- Read out : 0.01 %
- Repeatability, Weight 1 g : 0.2 %
- Repeatability, Weight 10 g : 0.02 %
* Display after Drying:
- % Humidity = Weight Reduction : 0 ∼ 100 %
- % Dry Mass = Residual Weight : 100 ∼ 0 %
- ATRO :100 ∼ 999 %
- Gr. Humidity = Liquid Substances / Weight Reduction
- Gr. Dry Mass = Solid Substances / Residual Weight
* Heater / Temperature Adjustment :
- Temperature Range 40 ∼ 250 ℃In Steps of 1 ℃
- Fixed Heating Stages (Constant Heat) : 20
- Pre-Heating Stage to Reduce Drying Time : 1 ∼ 99 min.
|