■ Microprocessor PID Controller. ■ Various Light Bank System. ■ 10 Step Programmable Control. ■ Self-Diagnostic Function. ■ LCD Back Light Display. ■ Touch-Sensitive Numeric Keypad. ■ Lamp-On-Delay System. ■ Technical Design and Construction. ■ Precise Temperature, Humidity and Gas Control.
* CO2 Control with IR sensor provide CO2 gas concentration up to
3,000 ppm to optimize photosynthesis condition.
* IMicroprocessor PID control with touch-sensitive membrane type keypad
provides precise temperature, relative humidity, illumination and
CO2 gas control, maintain uniform and accurate growth environment,
timer, alarm, auto-tuning and auto start stop function.
* I10 Step programmable controller provides automatic operation
of variable temperature, humidity and illumination value, maximum 999 cycle.
* ISelf-diagnistic function automatically check any malfunction
and make warning signal.
* ILight bank system with 8 step programmable control from four side,
control from 15,000 to 35,000 Lux.
* IHumidity control by electronic humidity sensor provide accurate
control from 30 to 98% RH.
* IOver temperature and current protection capability ensure user safety,
adjustable sliding rack, water level sensor.
특 징 (Features )
* 적외선(IR)센서를 이용한 가스 자동 조절 장치를 사용하여 CO2 농도를 5,000 ppm 까지
조절할 수 있도록하여 광합성 작용에 필요한 CO2 의 농도를 실험 조건에 맞게 조정
할 수 있음.
* 온도, 습도, 조도, CO2의 설정값을 첨단 기술의 마이크로프로세서 조절기를 사용, 정확한
실험 환경을 설정 할 수 있도록 편차를 최소화 시켜주는 첨단방식의 다기능 정밀 조절기를
사용함.
* 온도, 습도, 조도의 설정값은 10단계 까지 프로그램 을 설정하여 환경의 주기적 변화를
실험하는데 이상적이며 최대 999 Cycle 의 반복 실험이 가능함.
* 초기 전원 공급시 자기 진단기능을 시작하여 기기의 이상 유무를 표시함.
* 기기의 외부도어 3면 에서 23,000 Lux 공급, 4면 에서 35,000 Lux 까지 실험조건에
따라 광원을 공급 할 수 있으며 LCD Display 에서 조도를 표시해 주며 8단계 까지의
빛의 밝기를 프로그램화 하여 조도를 조절 할 수 있음.
* 증류수 공급장치를 사용하여 공급되어진 증류수를 증발 가습하여 습도를 30 ~ 98% 까지
조절 하여 주고, 전자식 습도 센서를 사용하여 습도를 정밀하게 조절 할 수 있음.
* 사용자의 안전을 우선적으로 고려한 과열, 과전류 방지용 안전 장치와 높낮이를 조절할
수 있는 슬라이딩식 선반, 수위 조절 센서 장착.
규 격 (Specification)
* CO2 range : 0 to 5,000 ppm or 0 to 20% * CO2 sensor : Digital process NDIR sensor * Temperature range : R/T. 0℃ to 60℃ * Temperature accuracy : ±0.2℃ at 25℃ * Humidity range : 30% to 98% RH * Humidity accuracy : ±1% at 70% * Sensor : Electronic sensor * Humidifier : Evaporation by motor with heater * Controller : Microprocessor PID multi-function controller * Display : LCD back light PV & SV display * Sensor : Photo sensor with flexible cable * Internal material : Stainless steel * External material : Powder coated steel * Internal door : Tempered safety glass with silicon packing * External door : 3 side magnetic packing door with light bank * Safety : Over Temp, Cut-off, Over current breaker * Power : 220V/60Hz
|