■
Measurement via LED-display
■ Acoustic Message Support
■ Solid Measuring Head
■ Rechargeable Battery Operation
■ 1-key Operation
특징 (Features)
* A portable instrument for the measurement of the solids content and
top level setting properties of waste water in basins and tanks.
* The detector is lowered into the liquid to be tested and depending
on the solids content the bar-graph responds. Upon reaching
the sludge sediment the LED display changes from green to red indicate
this point.
* An acoustic message supports this process and the audible tone changes
from an intermittent to a continuous tone when the sludge sediment
zone is reched.
* The depth of each layer (clear water, sediment layer) can be read
directly from the cable in steps of 0.5 m.
* The measuring head consists of an impact-resistant plastic housing and is
provided with a special LED light source. The lightbeam strikes the
photodiode on the opposite side.
* The instrument quickly supplies information about the depth of
the sludge-layer in a sedimentation basin.
규격 (Technical Specifications)
* Measuring Range : Approx. 200 ~ 5000 mg/l solids
* Display : LED-row, Multi-colour Bar-graph
* Acoustic Signal : Intermittent or Continuous Tone
* Battery : 7.2V Rechargeable Battery, Charge Indication
* Operation : 1-key Operation, The instrument switches off after
disconnection of the measuring head connector
* Ambient Temperature : 0 ~ 50 °C
* Enclosure : ABS Plastic Housing, Splashproof
* Dimensions : w135×d188×h78 mm
* Weight : 0.6kg (without Measuring Head, Cable and Carrying Case)
* EC Conformity : CE Identification Marking
|